Grizzly H5608 V-Block Pair with Clamps 1-5/8-Inch

#ad
#ad
Grizzly H5608 #ad - 1 5/8" x 1 1/4" x 1 1/4". 1" capacity. Numbered and matched pairs are precision ground for accuracy. This v-block pair is numbered and matched and are precision ground for accuracy. 1 5/8" x 1 1/4" x 1 1/4"1" capacity.

More information about Grizzly H5608 #ad

BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks

#ad
#ad
1-2-3 Blocks 54988 #ad - Squareness of all sides is within. 0002 per inch. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Precision ground. Heat treated above 48 Rockwell "C";. 0001 to. 0003 over allowance for nominal lapping.

More information about 1-2-3 Blocks 54988 #ad


Similar products



Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip

#ad
#ad
Mitutoyo 50101 #ad - Mitutoyo edge finder, shank Dia: 3/8", Tip Dia:. 200". Precision ground. All working surfaces are hardened and ground. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Used in a milling machine to find the workpiece edge.

More information about Mitutoyo 50101 #ad


Similar products



Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip

#ad
#ad
Mitutoyo 50103 #ad - Used in a milling machine to find the workpiece edge. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Used in a milling machine to find the workpiece edge. Mitutoyo edge/center Finder with 3/8" Shank Diameter, 0200" tip diameter, and cone-shaped center finder.

Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip #ad - All working surfaces are hardened and ground. Precision ground. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. All working surfaces are hardened and ground.

More information about Mitutoyo 50103 #ad


Similar products



Accusize Industrial Tools Stadard Tooth M42 8% Cobalt Tialn Roughing End Mill, 1/2'' by 1/2'' by 1-1/4'' Flt Length, 1102-0012

#ad
#ad
Accusize Co., Ltd. 1102-0012 #ad - Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. All working surfaces are hardened and ground. Recommended for abrasive materials. Excellent performance in hard materials that are difficult to cut. All working surfaces are hardened and ground. Precision ground.

Performance approaching solid carbide with tough H. S. S tools. Extremely hard, wear resistant. Extremely hard, wear resistant. Recommended for abrasive materials. Excellent performance in hard materials that are difficult to cut. Diameter: 1/2'', center cutting, coarse toothtialn coated, 4 flute, flutes ground by a world-class is-9002 factory, shank Diameter: 1/2'', Overall Length: 3-1/4'', M42-8% Premium cobalt, Flute length: 1-1/4'', CNC QualifiedProduces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.

Accusize Industrial Tools Stadard Tooth M42 8% Cobalt Tialn Roughing End Mill, 1/2'' by 1/2'' by 1-1/4'' Flt Length, 1102-0012 #ad - Used for aggressive machining. Diameter: 1/2'', shank diameter: 1/2'', flute length: 1-1/4'', overall length: 3-1/4'', 4 Flute, Coarse Tooth. Tialn coated, m42-8% premium cobalt, flutes ground by a world-class IS-9002 Factory, Center cutting, CNC Qualified. Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.

Used for aggressive machining.

More information about Accusize Co., Ltd. 1102-0012 #ad


Similar products



Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set

#ad
#ad
Anytime Tools AT200536 #ad - Used in a milling machine to find the workpiece edge. Top quality m2 hss drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes in stock. Extremely hard, wear resistant. Top quality M2 HSS. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

Performance approaching solid carbide with tough H. S. S tools. Precision ground. Sizes 1, 4 and 5, 3, 2, 60° tip angles. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes. Recommended for abrasive materials. Excellent performance in hard materials that are difficult to cut.

Anytime Tools 5 Center Drill Countersink Lathe Bit Mill Tooling Set #ad - All working surfaces are hardened and ground. Diameter: 1/2'', shank diameter: 1/2'', 4 flute, overall length: 3-1/4'', flute length: 1-1/4'', Coarse Tooth. Tialn coated, center cutting, m42-8% premium cobalt, flutes ground by a world-class IS-9002 Factory, CNC Qualified. Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.

Used for aggressive machining. Case hardened.

More information about Anytime Tools AT200536 #ad


Similar products



HFS R Hold Down Clamp Clamping Set Kit Bridgeport Mill 5/8"Slot 1/2" Stud

#ad
#ad
HFS #ad - Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Recommended for abrasive materials. Excellent performance in hard materials that are difficult to cut. Diameter: 1/2'', flute length: 1-1/4'', shank diameter: 1/2'', 4 Flute, overall length: 3-1/4'', Coarse Tooth.

Tialn coated, m42-8% premium cobalt, center cutting, flutes ground by a world-class IS-9002 Factory, CNC Qualified. Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots. Used for aggressive machining. All working surfaces are hardened and ground. Case hardened.

HFS R Hold Down Clamp Clamping Set Kit Bridgeport Mill 5/8"Slot 1/2" Stud #ad - Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Used in a milling machine to find the workpiece edge. Precision ground. All working surfaces are hardened and ground. Sizes 1, 4 and 5, 3, 2, 60° tip angles. Performance approaching solid carbide with tough H.

More information about HFS #ad


Similar products



Steelex M1096 Fly Cutter Set with Tool Bits

#ad
#ad
Steelex M1096 #ad - All working surfaces are hardened and ground. Bit sizes: 3/16-inch, 1/4-Inch and 5/16-Inch. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Used in a milling machine to find the workpiece edge. Sizes 1, 4 and 5, 2, 3, 60° tip angles.

Head sizes: 3/4-inch, 1-1/8-Inch and 1-3/8-Inch. Steelex fly cutter set with Tool Bits M1096 Precision ground. Recommended for abrasive materials. Excellent performance in hard materials that are difficult to cut. Extremely hard, wear resistant. Top quality M2 HSS. Set screws and blank hss tools included. Black oxide finish.

Steelex M1096 Fly Cutter Set with Tool Bits #ad - Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Diameter: 1/2'', shank diameter: 1/2'', flute length: 1-1/4'', overall length: 3-1/4'', 4 Flute, Coarse Tooth. Tialn coated, center cutting, m42-8% premium cobalt, flutes ground by a world-class IS-9002 Factory, CNC Qualified.

Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.

More information about Steelex M1096 #ad


Similar products



Türlen Test Dial Indicator 7 Jewels High Precision 0.0005" 0-15-0

#ad
#ad
TÜRLEN 13 #ad - Easy to read 1-3/16'' white face with black markings. 1/2-inch Shank. Durable satin chrome finish. Diameter: 1/2'', flute length: 1-1/4'', shank diameter: 1/2'', overall length: 3-1/4'', 4 Flute, Coarse Tooth. Tialn coated, center cutting, m42-8% premium cobalt, flutes ground by a world-class IS-9002 Factory, CNC Qualified.

Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots. Used for aggressive machining. Used in a milling machine to find the workpiece edge. Recommended for abrasive materials. Excellent performance in hard materials that are difficult to cut. Performance approaching solid carbide with tough H.

Türlen Test Dial Indicator 7 Jewels High Precision 0.0005" 0-15-0 #ad - S. S tools. Professional precision Tool! Easy-to-read 1-3/16" diameter face, 00005" graduation, 5/32" and 3/8" diameter posts with dovetail clamp, and automatic reversing. Features: easy to read 1-3/16'' white face with black markings 7 JEWELS Crisp graduations Durable satin chrome finish Graduations: 00005'' per line includes a padded case Precision ground.

All working surfaces are hardened and ground.

More information about TÜRLEN 13 #ad


Similar products



High Precision 15 Pc. Round 5C Collet Set 1/8-1" x 16ths Hardened T.I.R. 0.0005" Lathe

#ad
#ad
All Industrial #ad - Sizes 1, 2, 3, 4 and 5, 60° tip angles. Head sizes: 3/4-inch, 1-1/8-Inch and 1-3/8-Inch. Black oxide finish. Our part # all-41282. All working surfaces are hardened and ground. Bit sizes: 3/16-inch, 1/4-Inch and 5/16-Inch. Performance approaching solid carbide with tough H. S. S tools. Durable satin chrome finish. Includes a padded case.

High Precision 15 Pc. Round 5C Collet Set 1/8-1" x 16ths Hardened T.I.R. 0.0005" Lathe #ad - Set screws and blank hss tools included. 00005". Hardened and precision ground. Threaded internally and externally Guaranteed T. I. R. All working surfaces are hardened and ground. High precision 15 piece fractional 5C collet set includes 1/8-1" x 16th increments. 15 pc 5c collet set fractional 1/8" to 1" High Precision Lathe 15 Piece Precision ground.

1/2-inch Shank. Extremely hard, wear resistant. Top quality M2 HSS. Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes.

More information about All Industrial #ad


Similar products



HFS Ultra Precision 1-2-3" Blocks 2pcs/pair , 0.0001" Plastic Case

#ad
#ad
HardwareFactoryStore.com #ad - All working surfaces are hardened and ground. Diameter: 1/2'', 4 flute, shank diameter: 1/2'', overall length: 3-1/4'', flute length: 1-1/4'', Coarse Tooth. Tialn coated, flutes ground by a world-class IS-9002 Factory, m42-8% premium cobalt, Center cutting, CNC Qualified. Produces a smooth finish that often eliminates the need for a finishing cut for profiling and shallow slots.

HFS Ultra Precision 1-2-3" Blocks 2pcs/pair , 0.0001" Plastic Case #ad - Used for aggressive machining. Layout and inspection jobs product features has 23 holes with 5 holes tap to 3/8-16 threads for clamping and 18 untapped holes Made of hardened tool steel and precision ground on all six sides Cross drilling design allows efficient use of lower weight with maximum strength Heat treat and hardness 56 to 60 RC 2 pieces per set Weight: 2.

1 lbs Precision ground. Used for set-up, layout and inspection jobs. Black oxide finish. Set screws and blank hss tools included. Crisp graduations 00005'' per line. Squareness on all sides is 00003" per inch.

More information about HardwareFactoryStore.com #ad


Similar products


NeSeppe is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.